Fig. 6.37. Removal of a ware box and switch of the proofreader of the direction of light of headlights: 1 – ware box; 2 – switch of the proofreader of the direction of light of headlights

Disconnect a ware box, the switch of the proofreader of the direction of light of headlights from the back party and separate sockets of the panel of the switch of the proofreader of headlights (fig. 6.37).

Fig. 6.38. Otvorachivaniye of vinot of fastening of the handle of control of the automatic parking brake: 1 – screws

Turn out screws of fastening of the handle of control of the automatic parking brake (fig. 6.38).

Separate sockets of the handle of control of the automatic parking brake.

Remove the handle of management.

Fig. 6.39. Detachment of facing of a forward left rack of a body

Disconnect facing of a forward left rack of a body (fig. 6.39).

Fig. 6.40. Detachment of side facing of the dashboard

Disconnect side facing of the dashboard (fig. 6.40).

Fig. 6.41. Removal of the lower part of the dashboard

Turn off blota of fastening and remove the lower part of the dashboard (fig. 6.41).

Fig. 6.42. Removal of an air duct

Remove an air duct (fig. 6.42).

Remove a connecting axis of the "brake pedal-intermediate draft" hub.

Separate the socket of the sensor of provision of a pedal of an accelerator.

Separate the stoplight switch socket.

Turn the stoplight switch on a quarter of a turn counterclockwise.

Fig. 6.43. Cutting checks: 1 – line of a section

Cut to the check (fig. 6.43).

Insert to the check (Fre. 1752) from left to right (in case the pedal is not replaced).

Fig. 6.44. Nuts of fastening of knot of a pedal of a brake: 1 – nuts

Turn off nuts of fastening of knot of a pedal of a brake (fig. 6.44).

Remove the "brake pedal-a accelerator pedal" hub.

Turn off nuts of fastening and remove an accelerator pedal.