Disconnect the rechargeable battery.

Fig. 6.96. Otsoyedineiye of fastenings of a frame of a drawer

Disconnect a drawer frame, having wrung out spring latches (fig. 6.96).

Fig. 6.97. Removal of a drawer: 1 – spring latch

Remove a drawer, having wrung out a spring latch the flat screw-driver (fig. 6.97).

Disconnect a block of wires from the sensor of angular and cross accelerations.

Turn off nuts of fastening of the sensor and remove it.

ATTENTION Handle with the sensor with care.

Fig. 6.98. Direction of installation of the sensor

Surely install the sensor in the direction of the movement of the car (in the direction of an arrow in the figure 6.98).

NOTE The sensor which underwent blow is subject to obligatory replacement.

Installation is made as it should be, the return to removal.

Tighten the required moment 8 N · m of a nut of fastening of the sensor of angular and cross accelerations.

Connect the rechargeable battery.

In case of replacement of the sensor of angular and cross accelerations execute necessary operations with the help of the diagnostic unit.