Install the car on the two-rack-mount elevator.

Remove the hydroblock assembled.

Fig. 6.99. Removal of EBU: 1 – fastening bolts; 2 – EBU case

Turn off bolts of fastening of EBU on the block of regulation of pressure and remove EBU (fig. 6.99).

Do not clear the block of regulation of pressure.

Surely replace bolts of fastening of EBU.

Establish EBU, holding it for edges.

NOTE Do not press on E BU at installation, it has to rise into place without efforts.

The hydraulic pump has to be densely pressed to the block of regulation of pressure.

At installation of new EBU do not forget to fix the fork part of the socket located between the block of regulation of pressure and EBU.

Fig. 6.100. Assembly of the EBU block: 1 – hydraulic pump; 2 – block of regulation of pressure; 3 – EBU socket

Wrap bolts of fastening of EBU on the block of regulation of pressure (fig. 6.100).

Tighten the required moment 3 N · m bolts of fastening of EBU спомощью devices (Mot. 1608).

Install the hydroblock assembled.

Execute a configuration of an index of measurement of speed спомощью the diagnostic unit.

Remove codes of the malfunctions remembered by EBU.

Execute road test for malfunction elimination confirmation.