Install the car on the two-rack-mount elevator.

Remove the top covers of the engine.

Disconnect the rechargeable battery.

Fig. 6.28. Removal of a spherical tip of a cable of the multipurpose switch and cable of the drive: 1 – spherical tip of a cable of the multipurpose switch; 2 – drive cable

Remove a spherical tip of a cable of the multipurpose switch and a cable of the drive from a cover stopper on an arm of the modular socket (fig. 6.28).

Fig. 6.29. Removal of a cover of the diagnostic socket: 1 – cover of the diagnostic socket; 2 – lever detail

Uncover the diagnostic socket. Turn a lever detail on a quarter of a turn, then lower its (fig. 6.29).

Fig. 6.30. Removal of the handle of the selector: 1 – handle

Remove the selector lever handle, having pulled it (fig. 6.30) up.

Fig. 6.31. Removal of a decorative overlay of the console of the selector: 1 – slip

Disconnect a decorative overlay of the console of the selector (fig. 6.31).

Fig. 6.32. Selector socket detachment: 1 – socket

Separate the socket of the selector and open a ware box (fig. 6.32).

Fig. 6.33. Detachment of facing of the handle of the drive of the parking brake: 1 – facing

Disconnect facing of the handle of the drive of the parking brake (fig. 6.33).

Fig. 6.34. Detachment of the lower cover of the console of the selector: 1 – lower cover

Disconnect the lower cover of the console of the selector (fig. 6.34).

Fig. 6.35. Lighter socket detachment

Disconnect the holder of the lighter and separate the socket of the lighter (fig. 6.35).

Separate sockets of heating elements of seats (if the car is equipped by them).

Remove both front seats.

Fig. 6.36. Removal of the console of the lever of the selector: 1 – fastenings of the console

Slightly shift the console in the direction of the arrow shown in the figure 6.36 and remove it.