49909390

6.6.3. Removal

Remove decorative covers.
Disconnect wires from plugs of the rechargeable battery, since the minus plug.
Remove the rechargeable battery.

Fig. 6.16. Removal of the air resonator


Remove the air resonator (only for the K4J engine) (fig. 6.16).
Remove the pallet of the rechargeable battery.
Remove EBU of system of injection.

Fig. 6.17. Removal of components of the air filter: 1 – airintaking branch pipe; 2 – air branch pipe; 3 – case of the air filter


Remove an airintaking branch pipe, an air branch pipe and the case of the air filter (fig. 6.17).

Fig. 6.18. Removal of mufflers of noise of an admission: 1 – mufflers


Snimte left forward wheel, flap and both mufflers of noise of an admission (fig. 6.18).
Disconnect cables of the choice and gear shifting from the transmission.

Fig. 6.19. Cables of the choice and gear shifting


Disconnect both cables from levers on the transmission (fig. 6.19).

Fig. 6.20. Way of removal transfer choice cable tip


Squeeze a cable tip in points And, pull a clamp in the direction B and raise a cable in a point With (fig. 6.20).

Fig. 6.21. Installation of caps in tips of cables of the choice of transfers


Insert caps into tips of cables of the choice of transfers (fig. 6.21).
Remove the trailer switch of a pedal of a brake.
Remove with the syringe brake fluid from a tank that its level was below an opening of supply of liquid in the main cylinder of coupling.
Separate the socket of the sensor of level of brake fluid.
Remove the valve of selection of discharge of the vacuum amplifier of brakes.
Partially remove a front guard noise isolation.
Disconnect the pipeline of the main cylinder of coupling.
Remove the top spherical hinge of the mechanism of control of the transmission.

Fig. 6.22. Removal of an axis of a fork of a pedal of a brake


Remove from the party of salon an axis of a fork of a pedal of a brake And from a pusher of the vacuum amplifier of brakes (fig. 6.22).
Turn off two nuts of fastening of the main cylinder on the vacuum amplifier of brakes.
Incline the main brake cylinder forward to separate it from the amplifier, without making efforts for brake pipelines.

Fig. 6.23. Removal of the vacuum amplifier: In – fixing bolts of the vacuum amplifier of brakes


Turn out two fixing bolts of the vacuum amplifier of brakes In (fig. 6.23).