Cut off the plastic capsule located in the center of the bearing at the basis.

Fig. 3.86. Extraction of the bearing from a case

Install adaptation (B.Vi.1165) and take the bearing (fig. 3.86).

Fig. 3.87. Installation of the bearing from a case

Install the bearing by means of adaptation (B.Vi.1167) (fig. 3.87).

Push out an external ring of the bearing of a main shaft from a coupling case by means of a stripper with a diameter of 38 mm.

Fig. 3.88. Zapresovka of a bearing ring

Press a bearing ring by means of the plug with a diameter of 46 mm (fig. 3.88).