ATTENTION Handle the sensor of the course of a pedal of coupling with care.

Movement of a rod only at adjustment of the size X is allowed (see fig. 3.9).

Fig. 3.9. Coupling pedal course sensor: 1 – sensor case; 2 – rod

Separate the coupling pedal course sensor socket.

Turn the coupling pedal course sensor on 1/4 turns counterclockwise.

Remove the coupling pedal course sensor.

The sensor of the course of a pedal of coupling is subject to obligatory replacement if the rod separated from the sensor or adjustment required more than three changes of the size X.

Measure the rod vystupaniye size X. If the size X less than 17 mm, adjust it, having carefully pulled for the end of a rod. The size X has to be ranging from 17 mm up to (not less) than 18 mm (no more).

Hand press a coupling pedal.

Install the coupling pedal course sensor on pedal knot.

Block the sensor of the course of a pedal of coupling by turn on 1/4 turns clockwise.

At return of a pedal of coupling to a starting position support it by a hand.

NOTE The sensor of the course of a pedal of coupling is adjusted automatically depending on the provision of a pedal.

At automatic adjustment clicks of transition through the fixed provisions are heard.

Connect the socket.