Fig. 2.183. Press fitting of a back epiploon of a bent shaft

Press a back epiploon of a bent shaft a mandrel (Mot. 1129-01) (fig. 2.183).

Fig. 2.184. Press fitting of a forward epiploon of a bent shaft

Press a forward epiploon of a bent shaft a mandrel (Mot. 1385) (fig. 2.184).

Establish a flywheel with new bolts of fastening.

Establish a flywheel clamp (Mot. 582-01 or Mot. 1677).

Tighten the required moment (55 N · l) bolts of fastening of a flywheel.

Establish:

– the conducted clutch plate;

– casing of coupling with a press disk assembled.

Fig. 2.185. Centering of the conducted disk by means of a mandrel

Center the conducted disk by means of a mandrel (Emb. 1518) (fig. 2.185).

Tighten the required moment (0,8 N · l) bolts of fastening of a casing of coupling.

Remove a flywheel clamp.