Install the selector lever in situation "N".

Disconnect wires from plugs of the rechargeable battery, since the minus plug.

Remove:

– airintaking branch pipe;

– rechargeable battery;

– to a regiment under the rechargeable battery;

– EBU of system of injection together with an arm;

– case of the air filter;

– fastenings of a plait of wires.

Disconnect:

– sharovy tip of a cable of the drive of the multipurpose switch;

– a drive cable from a cover stopper on an arm of the modular socket.

Turn off two bolts of the lever of fastening of the multipurpose switch.

Switch-off the modular socket, having released for this purpose its mobile part.

Turn off three bolts of fastening of an arm of the modular socket.

Turn off two bolts of fastening of an arm of the modular socket.

Fig. 3.162. Socket of the multipurpose switch

Take the socket of green color of the multipurpose switch (12-contact) (fig. 3.162).

Install the multipurpose switch in neutral situation "N".

Adjust the multipurpose switch.

Installation is made as it should be, the return to removal.

Tighten the specified moment a selector drive lever nut (10 N · м).

Check operability of system and gear shifting.