Install a wheel on the car on the former place so that the gate of the tire was in the top situation.

Fig. 4.13. Installation and fixing of a wheel on the car: 1 – lower wheel bolts; 2 – top wheel bolts

Previously tighten wheel bolts the moment (30 N · l) on the hung-out wheel, since the lower bolts and finishing with top (fig. 4.13).

Turn a wheel on 180 ° that the gate appeared below.

Put the car on wheels.

Tighten the required moment wheel bolts.

Execute these operations on other wheels of the car.

Fig. 4.14. Wheel pro-collar: 1 – gate

Execute a control trip to be convinced of elimination of an imbalance.