Install the car on the two-rack-mount elevator.

Remove draft of the sensor of the proofreader of xenon headlights (if they are established).

Remove the left forward wheel.

Overnite a nave nut by means of adaptation (Rou. 604-01).

Disconnect a block of wires from the sensor of speed of rotation of a wheel.

Fig. 3.175. Removal of components of a shaft of the drive of the left wheel: 1 – finger of the spherical hinge of a tip of steering draft; 2 – finger of the top hinge of a rack of the stabilizer of cross stability; 3 – bolt of fastening of a spherical support of the lever of a suspension bracket

Overnite nut of fastening of a finger of the spherical hinge of a tip of steering draft (fig. 3.175);

Remove:

– the spherical hinge of a tip of steering draft from a rotary fist by means of adaptation (Tav. 476);

– a nut of fastening of a finger of the top hinge of a rack of the stabilizer of cross stability (see fig. 3.175);

– a bolt of fastening of a spherical support of the lever of a suspension bracket (see fig. 3.175).

Take away a power shaft from a rotary fist, having turned a rotary fist.

Take from a nave shlitsevy a shaft of the external hinge of a shaft.