ATTENTION You watch to spilling working liquid of a hydraulic actuator of coupling on the painted surfaces. If it happened, immediately wash away liquid water.

NOTE Do not mix various brands of working liquids of a hydraulic actuator of coupling. Do not reuse the merged working liquid of a hydraulic actuator of coupling.

Any hydraulic system works normally if air is removed from it.

During pumping add only pure liquid recommended by the manufacturer. Never reuse the liquid which flowed out from the hydraulic drive of switching off of coupling.

If in hydraulic system liquids of various brands incidentally mixed up, remove from it liquid, wash out pure liquid of the required brand and establish new sealing rings.

At continuous leak of liquid from the hydraulic drive or hit of air in it define the reason and the place of leak, eliminate damage.

Badly executed pumping of a hydraulic actuator can become the reason of incorrect results of diagnostics and unjustified replacement of details.

During any works on a coupling hydraulic actuator surely remove air from sites of a hydraulic contour:

– between a tank and the union for removal of air;

– between the union for removal of air and the working cylinder of the drive of coupling;

– at the increased free wheeling of a pedal.

Install the car on the two-rack-mount elevator.

Remove protection of the pallet of a case of the engine.

Separate the socket of the sensor of level of brake fluid in a tank.

Remove a stopper of a tank of a hydraulic actuator of brakes.