Nozzles fasten to a toplivoraspredelitelny stage holders.

Fuel constantly circulates on a nozzle case circle that formation of vials of vapors of gasoline allows to avoid and facilitates start of the hot engine.

Disconnect wires from plugs of the rechargeable battery, since the minus plug.

Remove the top covers of the engine and an inlet collector.

Disconnect a plait of wires from nozzles.

Fig. 2.206. Otvorachivaniye of bolts of fastening of a lining of cases of nozzles: 1 – fastening bolts

Turn off two bolts of fastening and remove a toplivoraspredelitelny stage, having carefully pulled it on themselves (see fig. 2.206).

Fig. 2.213. Removal of nozzles: 1 – holders of nozzles; 2 – nozzles

Remove holders of nozzles and nozzles (fig. 2.213).

ATTENTION If you removed a toplivoraspredelitelny stage and nozzles, surely replace uplotnitelyny rings and holders of nozzles.

Establish a toplivoraspredelitelny stage.

Tighten the required moment (9 N · l) bolts of fastening of a toplivoraspredelitelny stage.

Installation is made as it should be, the return to removal.

Attach wires to plugs of the rechargeable battery, since the plus plug.