Disconnect wires from plugs of the rechargeable battery, since the minus plug.

Raise a pillow of a back seat.

Remove the holder of a rug. Turn off a rug.

Turn off bolts of fastening of a slip, remove a slip and a cap of the hatch.

Disconnect blocks of wires, one or several quick disconnect connections of the hatch of the fuel tank.

Fig. 2.222. Removal of a slip and cap of the hatch of the fuel tank: 1 – bolts of fastening of a slip; 2 – hatch cap

Take measures to collect the following fuel.

Fig. 2.223. Untwisting of a nut of fastening of the "fuel pump-the fuel level sensor-the fuel filter" hub: 1 – special adaptation

Turn off a nut of fastening of the "fuel pump-the fuel level sensor-the fuel filter" hub by means of adaptation (Mot. 1397) (fig. 2.223).

Remove the "fuel pump-the fuel level sensor-the fuel filter" hub.

Take measures not to damage a float.

ATTENTION To exclude danger of deformation of a tank, establish into place a nut of fastening of knot of the fuel pump with the fuel level sensor and the fuel filter at once after removal of this knot.

Replace a sealing ring.

Fig. 2.224. Installation of the "fuel pump-the fuel level sensor-the fuel filter" hub: 1 – nut; And, In, With – tags

Establish the "fuel pump-the fuel level sensor-the fuel filter" hub, having combined a tag And on this knot with a tag In on the fuel tank (see fig. 2.224).

Screw a nut.

Tighten a nut before combination of a tag With on a nut with a tag In on the fuel tank and with a tag of "avec" on knot of the fuel pump with the fuel level sensor and the fuel filter (fig. 2.224).

Installation of other equipment is made as it should be, the return to removal.

Attach wires to plugs of the rechargeable battery, since the plus plug.