Disconnect wires from plugs of the rechargeable battery, since the minus plug.

Fig. 2.238. Removal of the air duct: 1 – air duct

Remove the air duct (fig. 2.238).

Disconnect a block of wires from the block of a butterfly valve and a hose of system of catching of vapors of fuel from the electromagnetic valve of a purge of an adsorber.

Fig. 2.239. Removal of the block of a butterfly valve: 1 – block of wires; 2 – hose of system of catching of vapors of fuel; 3 – fastening bolts

Turn off bolts of fastening and remove the block of a butterfly valve (fig. 2.239).

Replace laying at each removal of the block of a butterfly valve.

Installation is made as it should be, the return to removal.

Evenly tighten the required moment (13 N · l) bolts of fastening of the block of a butterfly valve.

Attach wires to plugs of the rechargeable battery, since the plus plug.