49909390

2.4.7. Removal and EBU installation of system of injection of the petrol engine (all engines)

Removal
Remove the top covers of the engine.
Disconnect wires from plugs of the rechargeable battery, since the minus plug.
Separate EBU sockets of system of injection.

Fig. 2.235. Location of EBU: 1 – sockets


Turn off four bolts of fastening of EBU to an arm and remove EBU (fig. 2.235).

Installation
Installation is made as it should be, the return to removal.
Tighten bolts of fastening of the shelf of the rechargeable battery (21 N · м).
Attach wires to plugs of the rechargeable battery, since the plus plug.

NOTE
At inclusion of ignition the block of a butterfly valve has to execute a cycle of programming of the minimum and maximum angles of opening of the gate.