2.2.10.4. Check of diameters of basic necks and openings of support of camshafts
|
Fig. 2.114. Measurement of diameters of basic necks
|
Measure diameter of basic camshafts (fig. 2.114).
Diameter of necks of the camshaft:
– necks No. 1,2, 3, 4, 5 – 24,979–25,000 mm;
– a neck No. 6 – 27,979–28,000 mm.
|
Fig. 2.115. Measurement of diameters of openings of support of camshafts
|
Measure diameter of each opening of support of camshafts (fig. 2.115).
Diameter of openings of support of camshafts:
– necks No. 1,2, 3, 4, 5 – 25,040–25,061 mm;
– a neck No. 6 – 28,040–28,061 mm.