49909390

2.6.4. Removal and installation of a starter (K4J, K4M engines)

Removal
Install the car on the two-rack-mount elevator.
Disconnect wires from plugs of the rechargeable battery, since the minus plug.
Remove the top covers of the engine.
Turn off a bolt of fastening of the muffler of noise of an admission of the engine and (K4M engine) which is taking away the air duct of the air filter.
Disconnect:
– a block of wires from the oil level sensor;
– blocks of wires from a starter.

Fig. 2.271. Removal of a starter


Turn off bolts of fastening of a starter and remove a starter (fig. 2.271).

Installation

Fig. 2.272. Verification of the adjusting plug: 1 – adjusting plug


Check existence of the adjusting plug (fig. 2.272).
Installation of other components is made as it should be, the return to removal.
Attach wires to plugs of the rechargeable battery, since the plus plug.
Tighten the required moment:
– bolts of fastening of a starter (38 N · l);
– bolts of fastening of a cover of the rechargeable battery (4 N · м).