Disconnect wires from plugs of the rechargeable battery, since the minus plug.

Remove the power unit and a turbocompressor.

Fig. 2.261. Removal of a final collector

Turn off nuts of hairpins of fastening and remove a final collector (fig. 2.261).

Installation is made as it should be, the return to removal.

Fig. 2.262. Order of tightening of nuts of fastening of a final collector

Tighten in the order shown in the figure 2.262 the required moment (20 N · l) nuts of hairpins of fastening of a final collector.

Establish a turbocompressor and the power unit.

ATTENTION At removal and installation of a turbocompressor it is necessary to observe strictly a repair technique to provide tightness of system. Non-compliance with these instructions can entail decrease in safety of the driver.