Disconnect wires from plugs of the rechargeable battery, since the minus plug.

Remove the case of the air filter.

Remove the block of a butterfly valve.

Switch-off pressure sensor in a collector and the air temperature sensor.

Fig. 2.248. Shutdown of sensors and coils of ignition: 1 – pressure sensor in a collector; 2 – air temperature sensor; 3 – ignition coils

Disconnect coils of ignition (fig. 2.248).

Turn off a plait of wires aside.

Fig. 2.249. Removal of an inlet collector

Turn off bolts of fastening and remove an inlet distributive collector (fig. 2.249).

All uplotnitelyny laying is subject to obligatory replacement.

Installation is made as it should be, the return to removal.

Fig. 2.250. Order of tightening of bolts of fastening of an inlet collector

Tighten in the order shown in the figure 2.250 the required moment (9 N · l) bolts of fastening of an inlet collector (fig. 2.250).

Tighten the required moment:

– bolts of fastening of the block of a butterfly valve (13 N · l);

– bolts of fastening of the case of the air filter (9 N · м).

Attach wires to plugs of the rechargeable battery, since the plus plug.