Disconnect wires from plugs of the rechargeable battery, since the minus plug.

Remove a relay block to have access to EBU of the electric fan of salon.

Remove an air supply air duct in a forward left part of salon.

Fig. 8.145. Socket of the sensor of provision of a pedal of an accelerator: 1 – socket

Separate the socket of the sensor of provision of a pedal of an accelerator (fig. 8.145).

Fig. 8.146. Removal of the switch of a stoplight: 1 – stoplight switch

Remove the stoplight switch, having turned it on a quarter of a turn (fig. 8.146).

Fig. 8.147. Removal of fastenings of EBU of the electric fan of salon: 1 – bolts of fastening of EBU; 2 – EBU socket

Turn out two bolts of fastening of EBU of the electric fan of salon and disconnect the EBU socket of the electric fan of salon (fig. 8.147).

Move apart pads of fastening of EBU a little.

Fig. 8.148. EBU of the electric fan of salon

Remove EBU of the electric fan of salon (fig. 8.148).

Fig. 8.149. Removal of a block of wires from the electric fan of salon: 1 – block of wires

Remove a block of wires from the electric fan of salon (fig. 8.149).

ATTENTION Pull for a rod to establish a mobile part of the switch in a starting position.

Fig. 8.150. Stoplight switch

Install the switch of a stoplight (fig. 8.150) in a nest.

Turn the stoplight switch on a quarter of a turn clockwise.

Installation is made as it should be, the return to removal.

Fig. 8.151. Connection of EBU

Watch fig. 8.151