7.6.8. Removal and installation of the sensor of external temperature
Removal
|
Fig. 7.99. Mirror glass removal
|
Remove mirror glass by means of special adaptation (Sagas. 1363) (fig. 7.99).
|
Fig. 7.100. Removal of the case of a mirror: 1 – ledges
|
Remove the mirror case, having pressed ledges (fig. 7.100).
|
Fig. 7.101. Removal of the sensor from an arm
|
Disconnect the sensor from an arm. Cut off wires (fig. 7.101).
Installation
Solder two wires of the sensor of temperature.
Insulate two wires of the sensor by means of thermoshrinkable plugs.
Install the mirror case.