Remove the screen wiper mechanism.

Disconnect an electric motor drive crank.

Fig. 7.111. Removal of the electric motor of a screen wiper: 1 – fastening nut; 2 – fastening bolts

Turn off a nut of fastening of a shaft of the electric motor and two bolts of fastening of the electric motor (fig. 7.111).

ATTENTION Before installation of a crank of the drive of the mechanism of a screen wiper be convinced that the electric motor is installed in the situation corresponding to a starting position of brushes on a windshield.

Install the electric motor in the situation corresponding to a starting position of brushes on a windshield.

Install the mechanism on the electric motor.

Tighten the required moment 8 N · m bolts of fastening of the mechanism.

Fig. 7.112. Installation of a crank of the drive of the mechanism: 1 – lugs

Arrange a mechanism drive crank between lugs (fig. 7.112).

Tighten the required moment 22 N · m an electric motor shaft nut.

Install the screen wiper mechanism.