49909390

7.6.3. Removal and installation of a guard of devices

NOTE
Only glass of a guard of devices is subject to replacement. If other its details are faulty, all guard of devices is subject to replacement.

Fig. 7.54. Guard of devices




Removal
Disconnect wires from plugs of the rechargeable battery, since the minus plug.

Fig. 7.55. Removal of a peak of a guard of devices


Remove the peak of a guard of devices fixed by spring clamps on the dashboard in the direction of the arrows shown in the figure 7.55.
Disconnect a loudspeaker of system of navigation if it is established on the car.

Fig. 7.56. Removal of a guard of devices: 1 – central bolt; 2 – spring clamps


Turn out the central bolt and remove a guard of devices, having pressed two spring clamps located from each its party (fig. 7.56).

Fig. 7.57. Socket of power supply of a guard of devices: 1 – socket


Separate the socket of power supply of a guard of devices (fig. 7.57).

Installation
Installation is made as it should be, the return to removal.
Connect the rechargeable battery, without making programming.
Execute a necessary configuration.
Disconnect the rechargeable battery.

NOTE
At this operation configurations of a guard of devices automatically are registered.

Connect the rechargeable battery and execute necessary programming.
Tighten the required moment 4 N · m bolts of fastening of a cover of the rechargeable battery.