49909390

2.7.3. Removal and installation of a radiator of the cooling system (F4R engine)

Removal
Install the car on the two-rack-mount elevator.
Disconnect wires from plugs of the rechargeable battery, since the minus plug.
Remove:
– top covers of the engine;
– forward wheels;
– protection of the pallet of a case of the engine;
– flaps.
Disconnect:
– a block of wires from fog lights (if they are established);
– liquid supply tubes to washers of headlights (if they are established).
Remove a bumper.

Fig. 2.280. The operations performed before removal of a radiator: 1 – sockets; 2 – cowl lock drive cable; 3 – holder; 4 – bolt of fastening of a radiator


Separate both sockets, disconnect a cowl lock drive cable, remove the holder and turn off a bolt of fastening of a radiator (fig. 2.280).
Disconnect liquid supply tubes to windscreen washer.

Fig. 2.281. Removal of a protective cross-piece of a bumper: 1 – cross-piece


Remove a protective cross-piece of a bumper (fig. 2.281).
Merge cooling liquid, having disconnected the taking-away hose from a radiator.
Disconnect the bringing hose from a radiator.
Disconnect the hoses connecting a radiator to a broad tank.
Disconnect a block of wires from the electric fan.

Fig. 2.282. A detachment of the bringing pipeline of an airair cooler: 1 – the bringing pipeline


Disconnect the bringing pipeline of an airair cooler (fig. 2.282)

Fig. 2.283. A detachment of the taking-away pipeline of an airair cooler: 1 – the taking-away pipeline


Disconnect the taking-away pipeline of an airair cooler (fig. 2.283)
Remove an airair cooler.
Disconnect the condenser from a radiator.
Remove a radiator.
Disconnect the engine cooling system electric fan from a radiator.

Installation
Installation is made as it should be, the return to removal.
Tighten the required moment (5,5 N · l) a collar of a hose of an airair cooler.
For installation of elastic collars use nippers for elastic collars (Mot. 1202-01).

ATTENTION
When performing operation take measures not to injure an edge of the cooling knots (a radiator, the condenser).

Attach wires to plugs of the rechargeable battery, since the plus plug.