Remove the top covers of the engine.

Disconnect wires from plugs of the rechargeable battery, since the minus plug.

Fig. 2.11. Removal of laying and plastic rivets: 1 – laying; 2 – rivets

Remove laying and plastic rivets (fig. 2.11).

Fig. 2.12. Detachment of a decorative slip: 1 – slip

Disconnect a decorative slip (fig. 2.12).

Fig. 2.13. Removal of the lever of a screen wiper: 1 – lever

Remove screen wiper levers by means of special adaptation (fig. 2.13).

Remove an air inlet niche lattice.

Fig. 2.14. Removal of fastening of noise-insulating material of a guard of a front: 1 – fastening of noise-insulating material of a guard of a front

Remove elements of fastening of noise-insulating material of a guard of a front and noise-insulating material of a guard of a front (fig. 2.14).

Fig. 2.15. Untwisting of a bolt of fastening of the muffler of noise of an admission: 1 – fastening of noise-insulating material of a guard of a front

Turn off a bolt of fastening of the muffler of noise of an admission (fig. 2.15).

Remove the muffler of noise of an admission.

Disconnect a vacuum hose of the amplifier of brakes from an inlet distributive collector.

Fig. 2.16. Detachment of a vacuum hose of the amplifier of brakes: 1 – vacuum hose; 2 – bolts of fastening of a cover of the air filter

Turn off two bolts of fastening of a cover of the air filter (fig. 2.16).

Remove the filtering element.

ATTENTION Do not damage a branch pipe of selection of depression on an inlet distributive collector. If the branch pipe is broken off, replace a collector.

Fig. 2.17. Detachment of fastening of the sensor of oxygen: 1 – socket; 2 – holder

Separate the socket of the oxygen sensor and remove the holder (fig. 2.17).

Fig. 2.18. Bolts of fastening of the airdistributing block: 1 – bolts

Turn off bolts of fastening of the airdistributing block (fig. 2.18).

Remove the case of the air filter.