Establish a seat pillow in the top situation (the spring is completely weakened).

Fig. 8.115. Removal of rivets of the mechanism of adjustment of a seat on height: 1 – rivets

Remove rivets of the mechanism of adjustment of a seat on height (fig. 8.115).

Remove the mechanism and the handle.

Separate the socket of a prednatyazhitel of a seat belt.

Fig. 8.116. Removal of fastening of a prednatyazhitel of a seat belt: 1 – socket; 2 – bolt

Turn off a bolt of fastening of a prednatyazhitel of a seat belt (fig. 8.116).

Fig. 8.117. Removal of covers of guides of a head restraint: 1 – covers

Uncover guides of a head restraint (fig. 8.117).

Fig. 8.118. Removal of a cover of fastening of the handle of adjustment lumbar seatback subtime

By means of special adaptation (Sagas. 1597) uncover fastening of the handle of adjustment lumbar a subtime of a seatback (fig. 8.118).

Fig. 8.119. Removal of the handle of adjustment lumbar seatback subtime

Remove the handle of adjustment lumbar a back subtime by means of the screw-driver with a flat edge (fig. 8.119).

Fig. 8.120. Removal of a casing: 1 – fastening screw

Unscrew the screw of fastening of a casing and remove a casing (fig. 8.120).

Separate the socket of a prednatyazhitel.

Fig. 8.121. Removal of a bolt of fastening of the lock of a seat belt: 1 – bolt

Turn off a bolt of fastening of the lock of a seat belt (fig. 8.121).

Fig. 8.122. Seat belt lock

NOTE To disconnect the socket, turn out screws of fastening of both covers of the lock (fig. 8.122).

Remove a seatback upholstery.

Fig. 8.123. Removal of guides of a head restraint

Remove guides of a head restraint (fig. 8.123).

Disconnect a block of wires and a wire from a safety cushion conclusion.

Fig. 8.124. Drilling of a rivet: 1 – rivet

Drill a rivet (fig. 8.124).

Remove a safety cushion.

Disconnect a wire from a conclusion.

Fig. 8.125. Safety cushion switch detachment: 1 – switch

Disconnect the switch (fig. 8.125).

Remove a seat pillow upholstery.

Fig. 8.126. Removal of a grid of the mechanism of adjustment lumbar seatback subtime

Remove a grid of the mechanism of adjustment lumbar a subtime of a seatback (fig. 8.126).

Remove clamps of covers of cables of the drive.

Fig. 8.127. Rivet of the mechanism of adjustment of a lumbar seat of a podporaspinka: 1 – rivet

Drill a rivet of the mechanism of adjustment of a lumbar seat (fig. 8.127) of a podporaspinka.

Remove the mechanism.

Fig. 8.128. Otvorachivaniye of the screw of fastening of the handle of adjustment of a seat in the longitudinal direction

Unscrew the screw of fastening of the handle of adjustment of a seat in the longitudinal direction (fig. 8.128).

Remove the handle (operation is similar to removal of the handle of adjustment of a seatback).

Fig. 8.129. Removal of a cable of the drive of the mechanism of blocking

Remove cables of the drive of the mechanism of blocking (fig. 8.129).

Remove a forward casing.

Fig. 8.130. Removal of draft of blocking of a seatback

Disconnect draft of blocking of a seatback (fig. 8.130).

Remove a cable.

Fig. 8.131. Removal of stoppers of a cover of a cable: 1 – stoppers

Disconnect a grid and stoppers of a cover of a cable (fig. 8.131).